How to Fix Windows 10/11 Stuck on Preparing Automatic Repair Loop

If you’ve ever encountered a frustrating situation where your Windows 10 or 11 computer gets stuck on the “Preparing Automatic Repair” loop, you’re not alone. This issue can be quite vexing, but fear not; there are several steps you can take to resolve it and get your PC back to normal. In this article, we’ll guide you how the troubleshooting process step by step.

Fixed: Windows 10/11 Stuck on Preparing Automatic Repair Loop

Briefly understand what causes the “Preparing Automatic Repair” loop. This issue typically occurs when your Windows operating system encounters problems during startup and attempts to automatically repair them. However, sometimes the repair process itself becomes stuck, leaving you in a loop.

Common Causes

1. Corrupted System Files: One of the primary reasons for this issue is corrupted or missing system files.
2. Hardware Issues: Faulty hardware components like a failing hard drive or RAM can trigger this problem.
3. Third-Party Software: Incompatibility or conflicts with third-party software can disrupt the boot process.
4. Windows Updates: Failed or incomplete Windows updates may lead to this situation.

Troubleshooting Steps

Now, let’s explore how to fix the “Preparing Automatic Repair” loop.

Accessing Advanced Startup Options

The first step is to access the Advanced Startup Options. Follow these steps:

1. Restart your computer.
2. When the Windows logo appears, press and hold the power button for 5 seconds to force a shutdown.
3. Repeat this process three times to trigger Windows into Automatic Repair mode.

System Restore

If you have previously created a system restore point, you can use it to revert your system to a working state.

1. In Advanced Startup Options, select “Troubleshoot.”
2. Choose “Advanced options” and then “System Restore.”

Startup Repair

Another option is to run the Startup Repair tool:

1. In Advanced Startup Options, select “Troubleshoot.”
2. Choose “Advanced options” and then “Startup Repair.”

H4: Check for Disk Errors

Disk errors can also cause the issue. To check and repair them:

1. In Advanced Startup Options, select “Troubleshoot.”
2. Choose “Advanced options” and then “Command Prompt.”
3. Type chkdsk /f /r and press Enter.

Disable Automatic Startup Repair

If the automatic repair feature is causing the loop, you can disable it:

1. In Advanced Startup Options, select “Troubleshoot.”
2. Choose “Advanced options” and then “Command Prompt.”
3. Type bcdedit /set {default} recoveryenabled No and press Enter.

Check for Hardware Issues

To rule out hardware problems, perform a thorough hardware check:

1. Inspect your RAM and hard drive for any visible issues.
2. Consider running a diagnostic tool provided by your PC manufacturer.

Reinstall Windows

If all else fails, you may need to reinstall Windows:

1. Create a Windows installation media (USB/DVD).
2. Boot from the installation media and follow the prompts to reinstall Windows.

Dealing with a Windows computer stuck on the “Preparing Automatic Repair” loop can be frustrating, but with the right troubleshooting steps, you can resolve the issue and get your system back on track. Remember to back up important data before attempting any major fixes, and if you’re unsure, seek professional assistance.